Gypsum mortar spraying machine is suitable for the construction industry, both inside and outside wall plastering mortar spraying, external wall insulation materials mortar spraying, mortar roughcast, painting refractory materials, building large area of fire prevention materials spraying, waterproofing agent spraying and other projects. Mortar spraying machine products are mainly used in construction, both inside and outside wall, cement mortar spraying machine and external wall insulation materials spraying, painting refractory materials.
Gypsum mortar spraying machine operation steps and request, per shift, before starting the first according to the several times of oil pump, oil injection to the transmission parts. After turning on the power supply, start the main motor, check the rubber walks can screw rotation direction and the direction of the arrow differences, if not their differences and will swap the power supply line. Pay attention to each time, the power supply is connected to stop the check.
Then good walks hose and nozzle. To the hopper in water 5 litres, start the motor will be fresh water pump, walked with damp hopper, pump body and hose. Will the big local pumping water, can be shut down. Participate in the us good mortar in proportion to the hopper (or paint), start the air compressor breeze valve, can boot spray.
Work, after the end of line immediately to the best of the remaining material inside the hopper, and infuse enough water to the hopper and thoroughly clean the hopper, and then boot will pump out, in order to clean the hose and nozzle, continue to pump out was full of water, in order to be finished cleaning. To avoid excess material in the hopper, hose and nozzle condensation, infarction hose and nozzle, affecting the service life of equipment used.